|
Polypropelene Pumps
| Features : |
Monobloc Pump
PP - 2/3/4 |
-
Small size bare / monoblac poly propelene pumps.
-
Fitted with seal / gland or PTFE bellow Mechanical seal.
-
Shaft is of SS-304 / 316 with ceramic coating and (PTFE
coating optional)
-
Very economical models as pumps made with minimum parts.
-
Very easy maintanance.
|
|
|
Performance Chart (with semi open impeller) |
| Model |
H.P. |
Size |
Head in Mtr. |
| 6 |
8 |
10 |
12 |
16 |
20 |
| PP-1 |
0.25 |
12 x12 |
22 |
18 |
0 |
Discharge in
LPM |
| PP -2 |
0.5 |
25 x 25 |
0 |
120 |
110 |
90 |
- |
|
| PP -3 |
1 |
25 x 25 |
0 |
150 |
142 |
118 |
60 |
- |
| PP -4 |
1.5 |
40 x 25 |
0 |
162 |
148 |
120 |
90 |
44 |
| PP - 5 |
1 |
25 x 25 |
130 |
90 |
50 |
0 |
- |
- |
-
Performance are at 2900 RPM, 50Hz and tested with clear
water.
-
Due to constant R & D activity, details are subject to
change without prior notice.
Application :
Phosporic acid plants, Gas washing plants, Rayon plants,
caustic joda plants for corrosive acids & basics, effluent treatment
handling.
 |
 |
|
Horizontal PP Pump |
Vertical Glandless Pump |
| Special Features of MHPP Series |
MVGP Series |
- Back pull out casing, very easy for maintain
- Heavy duty casted bearing housing
|
- No seal, stuffing box & gland
- Pump can run even in dry condition
- Maintanance free
|
Common Features :
-
Casing are made from injection moulded poly propelene
(single piece)
-
Impellers - semi open made from UHMW. Low NPSH performance.
-
Stuffingbox - made from UHMW, suitable for gland packing and
PTFE bellow mechanical seal
-
Shaft SS-316, Protected by Shaft sleeve of Alloy - 20 OR
Alumina filled PTFE or ceramic.
|
Water Rating Chart of Poly Propelene Pumps
|
| Model |
HP x RPM |
PUM SIZE |
Head in Meters |
| 6 |
10 |
12 |
15 |
20 |
25 |
30 |
35 |
40 |
Imp Dia |
MHPP-25/1/2
MVGP-25/1/2 |
1 x 2900 |
25 x 25 |
130 |
50 |
0 |
- |
- |
- |
- |
- |
- |
110 MM |
MHPP-40/2/4
MVGP-40/2/4 |
2 x 1450 |
50 x 40 |
75 |
- |
- |
- |
- |
- |
- |
Discharge |
150 MM |
MHPP-40/2/2
MVGP-40/2/2 |
2 x 2900 |
40 x 25 |
250 |
150 |
100 |
- |
- |
- |
- |
- in - |
130 MM |
MHPP-50/2/4
MVGP-50/2/4 |
2 x 1450 |
50 x 40 |
266 |
183 |
- |
- |
- |
- |
- |
- Litre - |
190 MM |
MHPP-50/2/4
MVGP-50/3/4 |
3 x 1450 |
50 x 40 |
400 |
300 |
200 |
0 |
- |
- |
- |
- Per - |
290 MM |
MHPP-50/3/2
MVGP-50/3/2 |
3 x 2900 |
50 x 40 |
480 |
415 |
350 |
325 |
200 |
0 |
- |
- Minute - |
140 MM |
MHPP-50/5/2
MVGP-50/5/2 |
5 x 2900 |
50 x 40 |
530 |
450 |
440 |
415 |
330 |
260 |
133 |
- |
- |
150 MM |
MHPP-75/5/4
MVGP-75/5/4 |
5 x 1450 |
75 x 65 |
- |
500 |
430 |
400 |
160 |
- |
- |
- |
- |
200 MM |
MHPP-75/5/4
MVGP-75/10/2 |
10 x 2900 |
75 x 65 |
- |
830 |
750 |
700 |
650 |
580 |
500 |
330 |
330 |
190 MM |
* Performance are at 2900 / 1450 RPM, 50 Hz and tested with
Clear Water.
Note : Special Pumps for Higher Capacity and Head available on
request.
|
