Excellent quick automatic action without foot valve up to 8 mtrs.

Automatic air release during priming.

Back pull out design, so easy maintainance without disturbing pipe lines.

Dynamically balanced rotating parts ensure less vibrations.

Better efficiency because of good hydraulic design.

Minimum parts, fast repairing at low cost, Also pump is available at economical rate.

Available in Bare, Coupled, Monobloc, Belt driven & Engine driven version.

Also offered pump with trolley / trailer to move it from one place to another.

Monobloc pumps can be able to with stand with wide voltage fluctuations.

Less expensive & easily available spares.

Pumps can be fitted with mechanical seal as per customer's requirements.

Very simple construction, only two moving parts.

Easy inspection of impeller.

Large diameter solids handled . up to 60 mm

High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating

Easy to install :- only the suction hose is immersed in the liquid, The pump can be set  up high and dry in the most convenient position for inspection and maintenance.

Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance. 

Public utilities :  For pumping muddy water, sewage, polluted liquids, solid and in swimming pool.

Dewatering Basements, Trenches, Construction sites.

Onboard shift, as bildge, for desk wash & engine cooling

Tiles & Marble factories, effluent plants.

Mobile Machinery : Cooling water for marine engines and shovels.

Any application where priming is to be avoided.

 Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty.

Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids.

Naval duty :  Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation.

Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge.

Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings.

Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing.  

Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation

Water circulation in paint spray booths; stripping fuel tanks circulation

Recovery of dirty solvents

Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline)

Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand

Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board

Marine duty; brine, sea intake and circulation of sea water in swimming pools

Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products

Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash

At Drilling Rigs